"Flowtech" Make Heavy Duty Tubular Liquid Level Indicator is a Simple & reliable device for direct reading in atmospheric or pressurized tank application. This indicator eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous damage surrounding equipments & also endanger human life. In our indicator top & bottom liquid Chamber is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel. The strength of the box is so good that even if a man can stands on the indicator, supported at both ends, the tube remains intact. We are using 100% PTFE ( TEFLON ) rope as packing ensure positive leak tightness for full vacuum as well as 6 Kg / Cm service pressure. Compare Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight. Our Tubular Level Indicator is available in single length of 2000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler. Scale Provided With this Level Indicator is linearly Calibrated & it is made of Aluminium / Acrylic / SS as per requirement. Depends upon the services, our liquid chamber is made of C.S. / S.S.304 / S.S.316 / MS With PP Teflon Lined or only PP. We are giving Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request. » It is simple and reliable device for direct reading in atmospheric or pressurised (below 5 kg/cm) tank application » It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking. » Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of 'C' - Channel » Aluminum / Acrylic / SS Linearly Calibrated Scale » MOC : MS, SS-304, SS-316, PP, MS with PP/PVDF Lined. » Offset Constructed Isolation Value on request.

ˆ Top

» A Magnetised Float moves with level in external Chamber (Cage) which is coupled with tank. Magnetically Coupled follower capsule or bicolour Roto ball / Roller / Flapper indicate the liquid level externally. » It is very safe and most reliable level indicator for aggressive, combustible, toxic, high pressure and high temperature liquids storage tank. » Suitable for Ethylene, Benzene, Toluene, Alcohols, Acids, Alkalies, liquified gases like NH, CI, LPG, Hot Oils, PCI, So, etc. » High and Low switching can be offered in weather proof or flame proof housing or request.

ˆ Top

Designed for high pressure & temperature liquid storage tanks in Petrochemicals, Fertilizers, Pharmaceuticals & Chemical Industries » In reflex level gauge, the glass has precision grooves cut inner side and mainly used for colourless liquids. » In transparent level gauge, the glasses are without grooves and arranged at the front and rear of a slotted liquid chamber and mainly used for coloured liquids. » Max. 3000 mm length in single piece. » Imported / Indigenous glasses on request.

ˆ Top

» Ideal Substitute to the dip stick method. » Horizontal and Underground Tanks. » Corrosive acids like Sulphuric, Nitric, Chlorosulphuric, Acetic Acids. » Solvents like benzene, acetone, toluene or any organic liquids - butadine, vinyl chloride. » No maintenance and No motive power require » Simple Non Magnetic can offer where PVC bicolour capsule mounted on float moves in glass tube externally.

ˆ Top

We offers a range of Float & Board Type Level Indicators are designed for application to Process or Storage Tanks where a readout to within 1" of Liquid Level is satisfactory and provides the additional convenience of being able to read out at 100 or 200 ft. away from the tank.

There are used for accurate liquid level gauging of Fixed or Floating roof Tanks storing Oil, Water, Solvents, and other Products. The units are designed and constructed to permit simple easy installation on "Tanks in Services" or "Tanks out of Services" and to Provide a Maximum of Trouble Free Services . The Indicators are Specially recommended for Application Requiring a Low Cost, Low Maintenance Method for liquid Level Ganging.

The Indicators are Float Operated with a steel target that runs vertically up and down, Registering tank contents on a calibrated Board that is mount, outside of the tank for quick convenient readings.

Features of Construction :

The Sturdy design and Stainless steel construction of the Float is resistant to the corrosive effect of Petroleum products and assures a long dependable use.

For highly corrosive liquids the float can be supplied in material such as P.V.C, Poly Propylene or Glass. The Float cable used to Secure the float to the Target Indicator is also of Stainless Steel.

Dust Proof Pulley hosing with PTFE Bush bearings assures smooth rotation of pulley as PTFE requires no lubrication and reduces friction to an absolute minimum.

Indicator target guide wires are galvanized steel. The target assembly is constructed of steel and furnished together with all of the other items listed above as standard equipment.

The board on the side of the tank which is supplied only when specified is of heavy gage aluminium channel construction having controlled cross-sectional geometry. The indicator gage board has bold legible markings in inches and feet with easy to read numerals every foot. The board can also be calibrated in the metric system, decimal system or special calibrations as may be required for the application. When indicator gageboards are specified all brackets and fittings necessary for mounting and installation are included.

Where it is necessary to store solvents under slight pressure liquid seal can be installed which will retain the flammable or toxic vapours within the tank and prevent excess vapour loss.

ˆ Top